100% NVME ALL-FLASH ARRAY

High-availability NVMe All-Flash Array nvme-48-smc-epyc

SUPERMICRO // AMD EPYC™ ZEN2
TCO-Optimized all-NVMe

SINGLE SOCKET AMD EPYC™

The NVME-20-SMC-EPYC provides 20 x 2.5” NVMe U.2 hot-swap drive bays in 2RU and uses AMD EPYC™ 7000-series single socket solutions for reduced power and cost.

HIGH PERFORMANCE

All-NVMe storage provides best case latency, IOPS & quality of service with minimal disruption during hardware failure and recovery.

Logical block diagram for ethernet attached NVMe all-flash storage array

HIGH AVAILABILITY

Transparent fail-over, self-healing storage & non-disruptive upgrades without custom client software, kernel drivers or complex host configuration.

FLEXIBLE NETWORKING

A dedicated 100Gbe storage interconnect provides independent high bandwidth and low latency between peers, eliminating requirements for expensive top of rack switching. This unit supports flexible network options via a x16 PCIe expansion slot. There is no need for specialized network hardware or host software.

SERVER SPECIFICATIONS

Chassis	SuperMicro AS-1113S-WN10RT
Processor	Single Socket AMD EPYC™ 7000-series
Memory	8 Channel DDR4 2666MHz ECC RAM
Onboard Storage	Dual M.2 NVMe (80mm/110mm, Gen3 x2)
Power	Redundant 750W PSUs (1+1)

Drive Bays	10x Hot-swap 2.5″ U.2 NVMe
Frontend Network	Flexible PCIe 3.0 x16 (FH/HL)
Backend Network	Direct 100 Gbe QSFP28
Host Network	2x 10GBase-T (LOM)
OOB Management	Dedicated IPMI 2.0 + KVM (RJ45)

PERFORMANCE GUIDANCE

CPU	RAM	Engines (max)	Latency (min)	4K IOPS (max)	Bandwidth* (max)
EPYC 7402P 1×24	64G	1	28 μs	500 K	4 GB/s
EPYC 7452P 1×32	64G	2	28 μs	1.0 M	8 GB/s
EPYC 7452P 1×32	128G	3	28 μs	1.5 M	12 GB/s